NEW PRODUCTS!
HOT HEADS 300 Style Cast Exhaust Manifolds - Chrysler |
||
|
|
A cast version of the "Letter Series/Truck" exhaust manifolds. This is a beefy version with thicker bolt flanges and, a direct replacement for those rare manifolds. Not as efficient as tube headers but far more efficient and less restrictive than the car version manifolds and will often fit where tube headers will not. | |
| P/N 60018 | Cast Exhaust Manifolds | $ 350.00 |
DUI / HEI Ignitions - Chrysler, Dodge, DeSoto |
||
 Click photo to enlarge. |
Drop in units available for Chrysler and Dodge Early Hemi. DeSoto requires our #21936 intermediate shaft. Features include: Coil in cap HEI design with tach hook up. Simple hook up, one 12 volt wire does it all. For single 4 bbl. applications.
'Live Wires': Aluminum wire looms: |
|
| P/N 27016 | 392 DUI/HEI Distributor | $ 395.00 |
| P/N 27017 | 354/331/325/315 DUI/HEI Distributor | $ 395.00 |
| P/N 27013 | 270/241 DUI/HEI Distributor | $ 369.00 |
| P/N 27013 | DeSoto DUI/HEI Distributor | $ 369.00 |
| P/N 27018 | 'Live Wires' - Black | $ 99.00 |
| P/N 27019 | Billet Wire Looms | $ 69.00 |
Cast Aluminum Finned Valley Cover - DeSoto |
||
|
|
Hot Heads classic finned aluminum valley cover includes a threaded 'O' ringed oil filler cap and flat areas for installation of our Jr. Breathers #80516P or a PCV barb fitting. Stainless Steel hardware is included and it's available satin finish or polished. | |
| P/N 21008 | Cast Alum. Valley Cover - Satin | $ 75.95 |
| P/N 21008P | Cast Alum. Valley Cover - Polished | $ 100.95 |
Finned Aluminum Valve Covers - DeSoto |
||
|
|
Hot Heads original design features more valve spring room to accommodate longer valves. Taller to accommodate larger springs. Smooth rounded design with short fins on spark plug wire platform. Machinable boss on inside of cover for 1 1/2" - 12 TPI oil cap. Valve covers are easily modified to accept most breathers. 'O' ringed to accept all spark plug tubes. Includes stainless steel hardware. Available satin finish or polished. | |
| P/N 21501 | Finned Valve Covers | $ 300.00 |
| P/N 21501P | Finned Valve Covers - Polished | $ 400.00 |
|
Hot Revised Price 1 x 4 Dual Plane Intakes |
||
|
|
276/291 DeSoto dual plane, single 4 Bbl., cast aluminum intake manifolds.
Designed to accept late Holley/Edelbrock carbs. and includes integral (Chevy pattern) thermostat mount. Ports are matched to the 330, 341, 345 heads and the exhaust crossover has been eliminated. These intakes are tapped for temp senders, heater control valve, manifold vacuum, thermostat bypass and even has provisions to purge air from the cooling system. These "High Rise" manifolds stand about 1 1/2" taller than the original cast iron manifolds. Manifold includes stainless steel hardware. The DeSoto 1x4 aluminum intakes #50055 and #50072 are cleanly designed to eliminate unnecessary bosses and bracketry. For those who prefer to run a generator, Use Generator Mount #50054 (second from bottom photo at left). |
|
| P/N 50055 | DeSoto 1x4 Dual Plane Intake | $ 495. |
| P/N 50072 | DeSoto 1x4 Dual Plane Intake | $ 495. |
| P/N 50054 | Generator Mount for P/N 50055 | $ 67. |
|
|
||
 Hot Heads Home |
Hemi Info |
Ordering |
| Chrysler Index |
Dodge Index |
DeSoto Index |
|
|
||